Technical Product Queries
To what tolerances do EGGER manufacturer Rawboard and MFC?
We manufacture to BS EN 312: 2003 - all tolerances:
Thickness: +/- 0.3mm
Length: +/- 5mm
Width +/- 5mm
Edge straightness: 1.5mm per m
Squareness 2mm per m
To what tolerances do EGGER manufacturer MDF?
We manufacture to BS EN 622-5 - all tolerances
What are the cleaning recommendations for MFC and MDF?
EGGER EURODEKOR® can be cleaned using a mild detergent / soap solution or degreased using a solvent solution containing Alcohol or Acetone.
Abrasive cleaning solutions must be avoided, as must solutions containing any acid or alkali.
.jpg)
