Home Sitemap FAQ General terms and conditions Imprint      
 
MORE FROM WOOD.  
MORE FROM WOOD.  
platzhaltergrafikIndustry SectorProductsServiceAbout usNews & MediaContactplatzhaltergrafik  
 
  Welcome to EGGER UK  
  » Home   » FAQ   » Industrial User     Print  
 
 

Frequently Asked Questions

Technical Product Information

What Is the fire resistance of EGGER HDX boards?

EGGER HDX has a reaction to fire Euroclass DFL - S1 rating, and a Class 3 rating to BS 476 Part 7.  38mm HDX also meets the requirements of the old Class 3 which is now replaced by the European standard D-s2 Do, and is the only board available with a "O" fire rating foil.  Please click here for further information

I have HDX protect boards, which have been damaged on site. Can they be repaired?

A repair kit is available please contact Simmons (Mouldings) Ltd  - http://www.epoxyworktops.com/

What is the difference between Service Class One and Service Class Two?

SC1 - For use in dry conditions i.e. HDX P6; SC2 - For use in humid conditions i.e. HDX P5

What expansion gaps do you recomend for HDX?

We recomend a minimum expansion gap of 10mm

How do you clean/maintain HDX?

For all HDX products a stiff brush/broom and damp cloth/mop should be sufficient to clean the product.

How do you seal the floor?

Epoxy based paints and resins may be used to seal floors.  EGGER do not recommend the use of water based paints or solvents.  Alternatively use HDX Protect

What are the manufacturing tolerances?

Length +/- 3mm; Thickness +/- 0.2mm; Width +/- 1mm; Diagonal +/- 3mm (ex-factory)

What are your point loads based on?

All point loads are based on a 50mm x 50mm concentrated load.  Greater point loads may be achieved through gluing the profiles with EGGER D4 Adhesive

What advice can you give on concentrated loads?

Adequate provision should be made for static and dymanic effects of concentrated loads (eg. wheel loads of powered trucks and racking systems).  Spreader plates should be provided as necessary to transfer permanent loads to the supporting structure (e.g. storage taks, stanchions and guard rail posts).  For storage platforms, 38mm HDX is suitable for 1 tonne pallet trucks all up weight at maximum 700mm joist centres, and for 1.5 tonne pallet trucks at maximum 525mm joist centre.

How do you fix HDX?

Please refer to page 15 of the Building Solutions Brochure





 
grauer_balken

EGGER NEWS

EGGER flooring features on Hit Channel 4 TV show

WEYROC® Protect, produced by EGGER, Europe’s leading wood-based panel manufacturer was a key component in a bespoke new-build home which appeared on the popular Channel 4 Television show Grand Designs. more mehr

Overview News mehr

EGGER UK