Technical Product Queries

What are the general characteristics of your standard products?

EGGER Laminates are available from the UK is postforming grade, and MED compliant (Marine Equipment Directive).  It is available in the following sheet size: 3050mm x 1300mm and has a thickness of 0.8mm. EGGER Laminates are manufactured on a continuous press (CPL : Continuous Pressure Laminate).
Click here for full technical data sheet of EGGER MED Laminate

EURODEKOR® Melamine Faced Chipboard (MFC) uses P2 grade chipboard, is available in the following board size - 2800mm x 2070mm  and 15 &18mm thicknesses  (other thicknesses available subject to enquiry)
Click here for full technical data sheet of EURODEKOR® MFC

EURODEKOR® MDF is available in the following board size: 2650mm x 2070mm and thickness of 15, 18 & 25mm (2800mm x 2070mm also available subject to enquiry)
Click here for full technical data sheet of EURODEKOR® MDF

EGGER Security Edging – Thickness – 2mm, Length – 75 linear meters, Width – 23mm.

EGGER Melamine Edging – Thickness – 0.3mm, Length – 100mm, Width – 22mm

 

What are the cleaning instructions for your products?

Due to their resistant, hygienic and dense surface, EGGER decorative surfaces do not require any special form of care.  Generally, the surfaces are easy to clean.  This also applies to textured surfaces.

 

What are the fire ratings for your products?

Laminate:
EGGER B1 / M1 Laminates, equivalent to Class 1 are available subject to minimum order quantities and delivery lead-times.  Please contact us for further details.

MFC:
EURODEKOR® Flammex, Euroclass B-s1,d0 (equivalent to Class 1) are flame retardant chipboards, and are available subject to minimum order quantities and delivery lead-times.  Please contact us for further details.